CMOS Integrated Circuit Simulation with LTspice

Avaliações :
( 0 )
260 pages
An ideal companion for students following a first course in integrated CMOS design.
Este é um e-book grátis para estudantes
Inscreve-te para acesso grátis
Todos os livros de estudantes são grátis para sempre. Menos de 15% de anúncios
Período de 30 dias grátis
Subscrição para empresas grátis nos primeiros 30 dias, após o período $5.99/mês
Última adição
Sobre o autor

Erik Bruun has been teaching analog electronics and CMOS integrated circuit design for more than 25 years at the Technical University of Denmark. From 1989 to 2016, Erik was a Professor in Analog Electronics and since 2016 he has continued his professional activities as a Professor Emeritus.

  • An ideal companion for students following a first course in integrated CMOS design.
  • An ideal introduction to circuit simulation for new students in electrical or electronics engineering.
  • Organized as a series of tutorials on specific subjects.
  • Includes end-of-chapter problems.
  • Covers introduction to LTspice for first-year students in electrical and electronics engineering - Tutorials 1 and 2.
  • Includes both the classic Shichman-Hodges analytic transistor models and modern BSIM transistor models for circuit simulation - Tutorial 3.
  • Deals with the basic CMOS gain stages both using analytical models and using simulation - Tutorial 4.
  • Includes an example of the design of a two-stage opamp using a combination of analytical methods and simulation - Tutorial 5.
  • Covers simulation of CMOS circuits in process corners and over temperature variations - Tutorial 6.
  • Includes several hints and pitfalls specific to LTspice at the end of every tutorial.
  • Appendix for the beginner with overviews of components and simulation commands.
  • Appendix for the CMOS designer with examples of BSIM CMOS models for use with LTspice.
  • Click here to download the exercise book.

  1. Tutorial 1 – Resistive Circuits 
    1. Example 1.1: A resistor circuit 
    2. Example 1.2: A transconductance amplifier 
    3. Example 1.3: A current amplifier 
    4. Example 1.4: Debugging a schematic 
    5. Problems 
  2. Tutorial 2 – Circuits with Capacitors and Inductors 
    1. Example 2.1: An RC network 
    2. Example 2.2: A half-wave rectifier with a smoothing filter 
    3. Example 2.3: An amplifier with a capacitive feedback network 
    4. Example 2.4: An ideal inductor 
    5. Example 2.5: Revisiting the capacitor charging and discharging 
    6. Example 2.6: Determining capacitances and resistances in RC networks 
    7. Problems 
  3. Tutorial 3 – MOS Transistors 
    1. Example 3.1: Different MOS transistor symbols and models in LTspice 
    2. Example 3.2: Advanced transistor models 
    3. Example 3.3: MOS transistor input characteristics 
    4. Example 3.4: MOS transistor output characteristics 
    5. Example 3.5: Deriving transistor parameters from input and output characteristics 
    6. Example 3.6: Simulating small-signal parameters using the ‘.tf’ simulation 
    7. Example 3.7: Simulating small-signal transistor capacitances using the ‘.ac’ simulation 
    8. Problems 
  4. Tutorial 4 – Basic Gain Stages 
    1. Example 4.1: The common-source amplifier (inverting amplifier) 
    2. Example 4.2: The common-drain amplifier (source follower) 
    3. Example 4.3: The common-gate amplifier 
    4. Example 4.4: The differential pair 
    5. Problems 
  5. Tutorial 5 – Hierarchical Design 
    1. Example 5.1: A two-stage operational amplifier 
    2. Example 5.2: Designing the two-stage opamp for an inverting feedback amplifier 
    3. Example 5.3: Generic filter blocks 
    4. Example 5.4: A mixed analog/digital circuit 
    5. Problems 
  6. Tutorial 6 – Process and Parameter Variations 
    1. Example 6.1: Model files for corner simulations 
    2. Example 6.2: An inverter 
    3. Example 6.3: A test bench for the two-stage opamp 
    4. Example 6.4: Monte Carlo simulation 
    5. Problems
  7. Tutorial 7 – Importing and Exporting Files 219
    1. Example 7.1: Importing a netlist file describing a current conveyor 219
    2. Example 7.2: Creating a subcircuit from a netlist 222
    3. Example 7.3: Exporting a netlist 229
    4. Example 7.4: Exporting other files 230
    5. Problems 234 

This is one of the best books on CMOS IC simulation with LTspice which I would like to recommend for researchers and students. During my M.Sc. thesis this book had helped me so much to learn the fundamentals. I would like to express my deepest gratitude and respect towards the author of this book Professor Erik Bruun.
29 de janeiro de 2019 16:19
More reviews