CMOS Integrated Circuit Simulation with LTspice

:
( 0 )
260 pages
Språk:
 English
An ideal companion for students following a first course in integrated CMOS design.
Dette er en gratis eBok for studenter
Registrer deg for gratis tilgang
Alle studentbøker er gratis, for alltid. Mindre enn 15% annonser
 
Gratis 30-dagers prøveperiode
Bedriftsabonnement gratis i de første 30 dagene, så $5.99/mnd
Sist lagt til
Om forfatteren

Erik Bruun has been teaching analog electronics and CMOS integrated circuit design for more than 25 years at the Technical University of Denmark. From 1989 to 2016, Erik was a Professor in Analog Electronics and since 2016 he has continued his professional activities as a Professor Emeritus.

...
Description
Content
Reviews
  • An ideal companion for students following a first course in integrated CMOS design.
  • An ideal introduction to circuit simulation for new students in electrical or electronics engineering.
  • Organized as a series of tutorials on specific subjects.
  • Includes end-of-chapter problems.
  • Covers introduction to LTspice for first-year students in electrical and electronics engineering - Tutorials 1 and 2.
  • Includes both the classic Shichman-Hodges analytic transistor models and modern BSIM transistor models for circuit simulation - Tutorial 3.
  • Deals with the basic CMOS gain stages both using analytical models and using simulation - Tutorial 4.
  • Includes an example of the design of a two-stage opamp using a combination of analytical methods and simulation - Tutorial 5.
  • Covers simulation of CMOS circuits in process corners and over temperature variations - Tutorial 6.
  • Includes several hints and pitfalls specific to LTspice at the end of every tutorial.
  • Appendix for the beginner with overviews of components and simulation commands.
  • Appendix for the CMOS designer with examples of BSIM CMOS models for use with LTspice.
  • Click here to download the exercise book.

  1. Tutorial 1 – Resistive Circuits 
    1. Example 1.1: A resistor circuit 
    2. Example 1.2: A transconductance amplifier 
    3. Example 1.3: A current amplifier 
    4. Example 1.4: Debugging a schematic 
    5. Problems 
  2. Tutorial 2 – Circuits with Capacitors and Inductors 
    1. Example 2.1: An RC network 
    2. Example 2.2: A half-wave rectifier with a smoothing filter 
    3. Example 2.3: An amplifier with a capacitive feedback network 
    4. Example 2.4: An ideal inductor 
    5. Example 2.5: Revisiting the capacitor charging and discharging 
    6. Example 2.6: Determining capacitances and resistances in RC networks 
    7. Problems 
  3. Tutorial 3 – MOS Transistors 
    1. Example 3.1: Different MOS transistor symbols and models in LTspice 
    2. Example 3.2: Advanced transistor models 
    3. Example 3.3: MOS transistor input characteristics 
    4. Example 3.4: MOS transistor output characteristics 
    5. Example 3.5: Deriving transistor parameters from input and output characteristics 
    6. Example 3.6: Simulating small-signal parameters using the ‘.tf’ simulation 
    7. Example 3.7: Simulating small-signal transistor capacitances using the ‘.ac’ simulation 
    8. Problems 
  4. Tutorial 4 – Basic Gain Stages 
    1. Example 4.1: The common-source amplifier (inverting amplifier) 
    2. Example 4.2: The common-drain amplifier (source follower) 
    3. Example 4.3: The common-gate amplifier 
    4. Example 4.4: The differential pair 
    5. Problems 
  5. Tutorial 5 – Hierarchical Design 
    1. Example 5.1: A two-stage operational amplifier 
    2. Example 5.2: Designing the two-stage opamp for an inverting feedback amplifier 
    3. Example 5.3: Generic filter blocks 
    4. Example 5.4: A mixed analog/digital circuit 
    5. Problems 
  6. Tutorial 6 – Process and Parameter Variations 
    1. Example 6.1: Model files for corner simulations 
    2. Example 6.2: An inverter 
    3. Example 6.3: A test bench for the two-stage opamp 
    4. Example 6.4: Monte Carlo simulation 
    5. Problems
  7. Tutorial 7 – Importing and Exporting Files 219
    1. Example 7.1: Importing a netlist file describing a current conveyor 219
    2. Example 7.2: Creating a subcircuit from a netlist 222
    3. Example 7.3: Exporting a netlist 229
    4. Example 7.4: Exporting other files 230
    5. Problems 234 

This is one of the best books on CMOS IC simulation with LTspice which I would like to recommend for researchers and students. During my M.Sc. thesis this book had helped me so much to learn the fundamentals. I would like to express my deepest gratitude and respect towards the author of this book Professor Erik Bruun.
29. januar 2019 kl. 16.19
More reviews